Electric repair stand - 1 clamp

(Code: PR-88100)
In Stock

After a long phase of analyzing your needs, R&D,and testing, we are proud to present our new generation of electric repairstand.

This stand is very fast and reliable, allowing forconsiderably improved productivity and working comfort

  • The PR-88100 single stand is convertible into the PR-88200 double stand with the help of the PR-88150 secondary column.
  • The clamp movement speed is 4 m/min, 2.6 times faster than the previous model.
  • The clamp automatically stops in the maximum and minimum position, as well as when a wheel touches the ground or an obstacle is in the clamp's path.
  • The extendable wired remote control allows for an ergonomic and ultra-comfortable working posture.
  • The ultra-sturdy and integrated PR-72000 professional clamp with 360° rotation is used. Its wide and adjustable opening (up to 88mm) allows for holding all kinds of tubes.
  • Our worm gear system is reliable, durable, and maintenance-free.
  • Low sound intensity, 52 decibels at a distance of 1 meter.
  • Delivered fully assembled on its base plate, ready to use.
  • Includes preparation for adding accessories (drillings and threaded inserts). Evolutionary design.
  • Designed and manufactured in France   


·NF standard (obtained through thevalidation of a control office, aimed at analyzing the risks associated withthe use of the repair stand).

·CE standard (in accordance with theMachinery Directive NF EN60204 in force).

·APAVE control
 The repair stand must be screwed to the ground in order to comply with the CE certification


Technical information


Maximum lifting capacity
55 Kg
Full travel distance
1 meter
Time to fully raise (full stroke)
15,2 seconds
Minimum height of clamp
70 cm
Maximum height of clamp
1,70 m
Length of wired remote control cable
50 cm
Extended length of wired remote control cable
1,50 m
Height of remote control cable exit point from the stand 
1,80 m
Power input
IEC 320 C13 industrial socket
Supply voltage (power cable provided)
230V~ 50Hz +/- 10% 
Power consumption in standby / idle / maximum load 
4,6 W / 75 W / 211 W
Electrical supply located on top of the stand 
1,63 m
Power output socket for accessory power strip 
IEC 320 C13 industrial socket
Output voltage of power output socket 
230V~ 50Hz +/- 10% 
Noise (average / maximum)
< 50 dB / < 70 dB
Torsion-resistant plate to be removed for conversion of a single PR-88100 stand to a double 
PR-88200 stand 
Manufactured from folded steel sheet
Epoxy paint
RAL 9006

Weight and dimensions


Single square base plate
74 x 74 cm
Spacing of base plate holes
68,5 cm
Diameter of base plate holes
10,5 mm
Thickness of base plate
8 mm
Weight of base plate
35 Kg
Total height of the repair stand on its base plate (included)
210 cm
Dimensions of a column
31 x 14 cm
Thickness of a column
14 cm
Length of a bicycle support arm
50 cm
Weight of a single repair stand PR-88100
110 Kg
Credit card, Bank transfer
DPD, Truck, UPS
Contact-us -
Technical adviser for your projetcs
Subscribe to our newsletter
Subscribe to our newsletter.