Err

Your cart 0 0.00 EUR
Continue Shopping
Transformation kit for single clamp electric repair stand

Transformation kit for single clamp electric repair stand

(Code: PR-88150)
In Stock

After a long phase of analyzing your needs, R&D,and testing, we are proud to present our new generation of electric repairstand.

This stand is very fast and reliable, allowing forconsiderably improved productivity and working comfort.


- Conversion column to transform a PR-88100 single clamp electric stand into a PR-88200 double-clamp electric stand. 
- Comes with PR-72000 professional clamp, fasteners kit, power cord and a user manual.
- Designed and manufactured in France   ▊▊▊


To transform a PR-88100 single clamp electric stand into a PR-88200 double-clamp electric stand, unplug your single clamp repair stand and let is rest for 20 minutes. This ensures you electrical safety. 

 

  • Remove all 3 protective casings form both columns (lateral and electrical panel) then, with a 4mm hex wrench, remove the anti-torsion backplate form the column to convert.
  • Link the second column to the first one and secure the assembly with ythe provided fasteners (column to column and baseplate).
  • Reinstall the casings and power the columns back. 

 

80000g

Technical information

Specifications

Maximum lifting capacity
55 Kg
Full travel distance
1 meter
Time to fully raise (full stroke)
15,2 seconds
Minimum height of clamp
70 cm
Maximum height of clamp
1,70 m
Length of wired remote control cable
50 cm
Extended length of wired remote control cable
1,50 m
Height of remote control cable exit point from the stand 
1,80 m
Power input
IEC 320 C13 industrial socket
Supply voltage (power cable provided)
230V~ 50Hz +/- 10% 
Power consumption in standby / idle / maximum load 
4,6 W / 75 W / 211 W
Electrical supply located on top of the stand 
1,63 m
Power output socket for accessory power strip 
IEC 320 C13 industrial socket
Output voltage of power output socket 
230V~ 50Hz +/- 10% 
Noise (average / maximum)
< 50 dB / < 70 dB
Torsion-resistant plate to be removed for conversion of a single PR-88100 stand to a double 
PR-88200 stand 
Manufactured from folded steel sheet
Epoxy paint
RAL 9006

Weight and dimensions

Specifications

Single square base plate
74 x 74 cm
Spacing of base plate holes
68,5 cm
Diameter of base plate holes
10,5 mm
Thickness of base plate
8 mm
Weight of base plate
35 Kg
Total height of the repair stand on its base plate (included)
210 cm
Dimensions of a column
31 x 14 cm
Thickness of a column
14 cm
Length of a bicycle support arm
50 cm
Weight of a single repair stand PR-88100
110 Kg

DOCUMENTATION

 
SECURED PAYMENT
Credit card, Bank transfer
QUICK SHIPMENT
DPD, Truck, UPS
Contact-us
02.37.33.37.10 - contact@vartools.com
ASSISTANCE
Technical adviser for your projetcs
Newsletter
Subscribe to our newsletter
Subscribe to our newsletter.